Invacare Spree XT, Owner'S Operator And Maintenance Manual

Page: 48 / 76

SECTION 5—ARMS
Spree XT
48
Part No 1118364
Removing T-Arms
1. Press the locking lever in and lift the T ‐ Arm straight up and out of the T ‐ Arm socket.
NOTE: If the T ‐ Arm does not slide up and down in the T ‐ Arm socket as desired, adjust
the T ‐ Arm socket. Refer to Adjusting T ‐ Arm Sockets on page 50.
2. Repeat STEP 1 for opposite side of the wheelchair.
Adjusting The T-Arms
Adjusting T-Arm Height
NOTE: For this procedure, refer to
FIGURE 5.9.
1. Unlock the T ‐ Arm by flipping the
T ‐ Arm release lever towards the inside
of the wheelchair.
NOTE: If necessary, pull the T ‐ Arm release
lever out and rotate 180° so it can be flipped
towards the outside of the wheelchair.
2. Slide the T ‐ Arm to one of:
• Low Height T ‐ Arms ‐ Nine
positions.
• High Height T ‐ Arms ‐ Seven
positions.
NOTE: If the inside T ‐ Arm post does not
slide up and down in the outside T ‐ Arm
post as desired, perform one of the
following:
• Tighten ‐ Tightening the set screws
on the outside T ‐ Arm post will
make it more difficult to move the
inside T ‐ Arm post up and down.
FIGURE 5.9 Adjusting T-Arm Height
• Loosen ‐ Loosening the set screws on the outside T ‐ Arm post will make it easier to
move the inside T ‐ Arm post up and down.
3. Lock the T ‐ Arm by flipping the T ‐ Arm release lever towards the front of the
wheelchair.
Set Screws
T-Arm Release Lever -
UNLOCKED Position
Outside T- Arm Post
T-Arm Release Lever -
LOCKED Position
INSIDE T-Arm Post
T-Arm