SECTION 5—ARMS
45
Using/Installing/Adjusting Non-Locking Cantilever
Arms
WARNING
DO NOT use lap trays with non-locking cantilever arms.
Using Non-Locking Cantilever Arms
WARNING
DO NOT use lap trays with non-locking
cantilever arms.
NOTE:
For
this
procedure,
refer
to
1. Pull
the
end
of
the
cantilever
arm
down
to
lower
the
cantilever
arm.
2. Pull
the
end
of
the
cantilever
arm
up
to
move
it
out
of
the
way.
Installing Non-Locking Cantilever Arms
NOTE:
For
this
procedure,
refer
to
1. Remove
the
locknut
and
washer
from
the
lower
hex
bolt
installed
on
the
non
‐
locking
cantilever
arm.
2. Slide
hex
bolt
of
the
cantilever
arm
assembly
into
the
desired
back
cane
mounting
hole.
3. Secure
the
cantilever
arm
to
the
wheelchair
with
a
washer
and
locknut.
4. Adjust
the
angle
of
the
cantilever
arm,
if
necessary.
FIGURE 5.5
Cantilever Arms - Adjusting Non-Locking
Back Cane
Cantilever Arm
Rear
Coved Washers and
Spacer
Locknut
Washer
Lower Hex Bolt
Cantilever Arm
Back Cane
