Invacare Spree XT, Owner'S Operator And Maintenance Manual

Page: 42 / 76

SECTION 5—ARMS
Spree XT
42
Part No 1118364
SECTION 5—ARMS
WARNING
NEVER try to lift or tip the wheelchair by the arms, serious injury can occur.
After any adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Using/Installing/Adjusting Locking Cantilever Arms
Using Locking Cantilever Arms
NOTE: For this procedure, refer to FIGURE 5.1.
1. Push the locking mechanism actuator towards the front of the wheelchair.
2. While holding the locking mechanism actuator, pull up on the cantilever arm towards
the rear of the wheelchair.
NOTE: If necessary, the locking mechanism in the cantilever arm can be repositioned so the
cantilever arm will open down instead of up. For this adjustment, contact a qualified technician.
3. To lock the cantilever arm, push down until there is an audible click.
4. Pull up on the cantilever arm to make sure it is locked in place.
FIGURE 5.1 Using Locking Cantilever Arms
Front of Wheelchair
Locking Mechanism
Actuator
Cantilever Arm
Push
Rear of
Wheelchair