IntesisBox ME-AC-KNX-1i, User Manual

Page: 38 / 63

IntesisBox
®
KNX
– Mitsubishi Electric A.C.
User's manual r2.3 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
URL
Email
tel http://www.intesisbox.com
info@intesisbox.com
+34 938047134
38 / 63
➢
Scene “x” / Value for On -Off
This parameter lets choose the power of the indoor unit when the scene is executed.
The following options are available:
“ON”, “OFF” or “ (unchanged) ” .
➢
Scene “x” / Value for Mode
This parameter lets choose the mode of the indoor unit when the scene is executed.
The following options are available:
“AUTO” , “HEAT“, “COOL” , “FAN (if
available) ” , “DRY” , or “(unchanged)” .
➢
Scene “x” / Value for Fan Speed (if available)
This parameter lets choose the fan speed of the indoor unit when the scene is
executed. The following options are available:
“FAN SPEED AUTO (if available) ” ,
“ FAN SPEED 1” , “ FAN SPEED 2” , “ FAN SPEED 3 (if available) ” , “ FAN SPEED 4
(if available) ” , or “(unchanged)” .
➢
S cene “x” / Value for Vane U-D (if available)
This parameter lets choose the vane position of the indoor unit when the scene is
executed. The following options are available:
“VANES U - D AUTO (if available)”,
“ VANES U-D POS 1” , “ VANES U-D POS 2” , “ VANES U-D POS 3” , “ VANES U-D
POS 4”, “ VANES U-D POS 5 (if available) ”, “ VANES U-D SWING ” or
“(unchanged)” .
➢
Scene “x” / Value for Setp Temp (ºC)
This parameter lets choose the setpoint temperature of the indoor unit when the
scene is executed. The following options are available: from
“19ºC” to “28 ºC ” (both
included), or “(unchanged)” .
➢
Scene “x” / Value for Remote Lock
This parameter lets choose the remote controller status of the indoor unit when the
scene is executed. The following options are available:
“locked” , “unlocked” , or
“(unchanged)” .
Important: If any preset value is configured as “(unchanged)” , the execution of
this scene will not change current status of this feature in the AC unit.
Important: When a scene is executed, Status_ Current Scene object shows the
number of this scene. Any change in previous items does Status_ Current Scene
show
“No Scene” . Only changes on items marked as “(unchanged)” will not
disable current scene.