◦
Bug
Addressed a problem that could cause a navigation list to have no visibly selected item
even though its editor panel is shown if the item is clicked quickly while the mouse is moving off
the side of the list.
◦
Bug
The
New Show
window now prevents show names from containing double-quote
characters.
◦
Bug
Addressed a problem where CueServer Studio could become unresponsive after a
CueServer device goes offline and then later returns.
◦
Bug
Addressed a problem that caused shows from being deleted if they included ‘single-quote’
characters.
•
CueScript
◦
Feature
The CHANNEL command and associated selection commands have been extended to
support channel numbers in the
universe.channel
format.
◦
Feature
A new DO command was added to allow manual triggering of a button or contact’s
events based on the current physical state of the button or contact.
◦
Feature
The LOG command can now log scalar values and arrays in addition to strings.
◦
Feature
Escape characters (i.e.: \n, \r, \x00, etc.) are now processed in all strings.
◦
Feature
Added the AT INPUT syntax to the AT command.
◦
Feature
Added the AT OUTPUT syntax to the AT command.
◦
Feature
The AT command can be used to set button indicators to User colors by using the
constants 1, 2, 3, and 4.
◦
Feature
The AT command can now set the submasters of multiple playbacks simultaneously
using a command such as [Playback 1>5 At 50].
◦
Feature
The CLEAR command can now clear multiple playbacks simultaneously using a
command such as [Playback 6>10 Clear].
◦
Feature
Playback faders can now be enabled and/or disabled using [Playback
n
Enable/
Disable].
◦
Feature
Added the JOIN command. Zones can become members of a join pool with a command
such as [Zone “Lobby” Join 3].
◦
Bug
Nested CueScript statements now properly inherit the context of the parent.
◦
Bug
Addressed a problem that caused the WRITE command to not properly process escape
characters in the output string if the destination was a UDP message.
◦
Bug
Addressed a problem with the MINUS command that would sometimes deselect the wrong
object.
◦
Bug
Addressed a problem that caused SET and WRITE commands nested within an IF/THEN/
ELSE statement to cause the entire script to fail to execute.
◦
Bug
Addressed a race-condition that could allow an auto-follow to occur while the RESET
command is executing which could cause Cue 0 (zero) to attempt to execute.
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 377 of 429