Interactive Technologies CueServer 2 User Manual Download

Page: 392 / 431

Release v1.4.2 [March 17, 2016]

Version 1.4.2 (3/17/2016)

•

CueServer Studio 2

◦

Feature

Added a new Diagnostic Tools section to the Help menu. Two network analysis tools

have been added:

▪

sACN Network Monitor

– Scans the network for active universes of sACN data. Shows

the sources of sACN data on a particular network. Visualizes a chosen sACN source by
showing the channel values as bar graphs or RGB pixels.

▪

CueStation Network Monitor

– Monitors and captures any CueStation button and/or

indicator commands found on the network. Displays (or filters) each event based on event
type, source, station or button.

◦

Feature

When switching to the Stage or Playback views, the command line is now always

active.

◦

Feature

KiNET v2 now allows each port to be assigned it’s own separate IP Address.

◦

Bug

Addressed a problem that caused a crash when changing the number of buttons on a

station while editing an offline show file.

◦

Bug

Addressed a problem that occurred when renaming the active show file, or a show with an

open editor window.

◦

Feature

Changed the behavior of the Network Settings window to automatically adjust the

gateway field when changing the IP Address and/or Subnet Mask to guarantee that the chosen
gateway would always be reachable on the network.

◦

Bug

Addressed a problem with the System Log view on Retina displays that caused the text to

appear very small.

◦

Bug

Addressed a problem that caused the Navigator Window to not become frontmost when

right-clicking on the Device or Project lists [OS X Only].

•

Firmware

◦

Feature

Added an update routine that periodically refreshes indictor values in case a CueStation

Hub misses update messages or is power cycled.

◦

Bug

Addressed a problem with CueStation Hub communications that occurred when setting

many indicator values at once that could cause some indicators to not properly change value.

◦

Feature

The WRITE command now processes embedded C-style escape characters in the

string.

◦

Feature

Changed the KiNET v2 driver to support separate IP Addresses for each port.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 390 of 429

Summary of Contents for CueServer 2















































































































































































































































































































































































































































Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands

Interactive Technologies CueServer 2, User Manual

Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands