Interactive Technologies CueServer 2 User Manual Download Page 45

Page: 45 / 431

Status

The

Status

page provides several views that show live status of various CueServer subsystems.

The following status views are available:

•

Front Panel

– a live view of the front-panel of the CueServer.

•

Variables

– a live listing of user-defined variables.

•

CPU Info

– a live view of the hardware status.

•

System Log

– the current system log.

Note that if any of the status views has an important condition that needs to be shown to the user, the
caution icon (

) will appear to the right of the corresponding line in the list of status views.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 43 of 429

Summary of Contents for CueServer 2















































































































































































































































































































































































































































Search results

Summary of Contents for CueServer 2

Reviews:

Brands by name

Popular brands

Interactive Technologies CueServer 2, User Manual

Search results

Summary of Contents for CueServer 2

Reviews:

Brands by name

Popular brands