manualshive.com logo in svg

Interactive Technologies CueServer 2, User Manual

Share
Download
Interactive Technologies CueServer 2 User Manual Download Page 381

◦

Bug

Addressed a problem that caused DMX signal loss events to occur just after the DMX input

buffer was cleared instead of just before.

•

LCD and Front-Panel Display

◦

Feature

Added optional CPU Load, IO Status, and Timecode displays to the LCD idle screen.

◦

Feature

The brightness curves for the built-in function button indicators LEDs have been

adjusted to produce a more linear visual response.

◦

Bug

Improved performance.

•

Show Database

◦

Bug

Addressed a problem that could occur if a copy of the show directory was manipulated by

the Finder on Mac OS and then re-uploaded into the CueServer.

•

Web API

◦

Feature

Added additional variables to the ‘in’ and ‘out’ get.cgi API functions to limit the scope of

the returned result.

◦

Bug

The correct indicator colors are now properly sent to the CuePad app and CueTouch

panels.

◦

Bug

Addressed a problem with the ‘in’ and ‘out’ selectors of the get.cgi API not returning the

proper data.

◦

Bug

Improved performance of the API for multiple clients.

•

Auto-Discovery

◦

Bug

Improved the Internet reachability detection algorithm.

◦

Bug

Addressed a problem that could cause device discovery to not function after the host

computer sleeps and then re-awakes.

•

Diagnostic Tools

◦

Feature

The

CueStation Network Monitor

now automatically scrolls the event window as events

are added to the bottom of the list.

•

Windows Build

◦

Bug

Addressed several problem areas that were creating excessive flickering on Microsoft

Windows.

◦

Bug

Addressed the problem of pushbutton control height being too small on Windows builds.

◦

Bug

Several popup windows are no longer resizable nor do they have close/minimize buttons.

◦

Bug

Addressed a problem that caused the Helvetica Neue font to be used in several places

instead of the Windows theme font.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 379 of 429

Summary of Contents for CueServer 2
















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands