Interactive Technologies CueServer 2 User Manual Download

Page: 60 / 431

Source Menu

This menu has several options to specify the source of the DMX channel values that will be recorded into
the cue:

•

DMX Input

– The DMX channel values being input into the CueServer will be recorded. None of the

values in the playbacks or being output will be recorded.

•

Playback n

– The DMX channel values in Playback

will be recorded. Neither the DMX input or

output will be recorded.

•

DMX Output

– The DMX channel values being output from the CueServer will be recorded. This is the

default option.

Capturing Channel Values

Once the appropriate options have been selected, click on the

Capture

button to record the current DMX

values into the cue. The Capture window will close and the cue will be updated to show the newly captured
channels.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 58 of 429

Summary of Contents for CueServer 2















































































































































































































































































































































































































































Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands

Interactive Technologies CueServer 2, User Manual

Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands