Interactive Technologies CueServer 2 User Manual Download

Page: 384 / 431

Release v1.5.4 [September 8, 2016]

Version 1.5.4 (9/8/16)

•

CueServer Studio 2

◦

Bug

Addressed a problem that could cause a streaming cue to become corrupted if its cue

number is changed.

◦

Bug

Addressed a problem that caused offline shows to not show cue stacks in the hierarchical

menu below the

Cues

item.

◦

Bug

Addressed a problem with the

sACN Network Monitor

that could cause it to show an

incorrect RGB color in the last channel position of the preview area.

•

Firmware

◦

Bug

Streaming cue playback now freezes properly when a playback fader is stopped.

◦

Bug

Front-panel brightness is now properly reset when switching shows.

◦

Bug

Addressed a problem that caused the show file to not receive a System Power-On event.

◦

Bug

Addressed an issue that made it not possible for a show to set the LCD brightness when a

show was loaded.

◦

Bug

Addressed a problem that could cause CueServer to become unresponsive when a

CS-940 is improperly configured as a CS-900 and one of the DMX Input ports is set to be a
DMX Output.

Interactive Technologies, Inc.

CueServer 2 User's Manual - 18.5.18

Page 382 of 429

Summary of Contents for CueServer 2















































































































































































































































































































































































































































Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands

Interactive Technologies CueServer 2, User Manual

Search results

Summary of Contents for CueServer 2

Reviews:

Related manuals for CueServer 2

Brands by name

Popular brands