Intellijel Tete, User Manual

Page: 156 / 173

Tête + Tetrapad Manual
You can toggle between ​ Insert ​ and ​ Overwrite Mode ​ by repeatedly pressing the ​ LOOPY
button.
5. Rotate the Encoder to move the cursor around inside the existing sequence.
NOTE: If you move the cursor to the end of the sequence, you’ll exit Insert Mode, and be back
in Append Mode.
6. When the cursor is over the step before which you want to insert a new event, press the pad
corresponding to the value you want inserted.
7. Additionally, you can press Tête’s Encoder, then rotate to change the step’s gate parameters.
For voltages, this means deciding whether to add a gate action or not.
For notes, it means deciding whether to add a rest, a tie/slur, or a note with a gate value of
25%, 50%, or 75%.
8. Press the Encoder to toggle between using it to scroll through the sequence, or using it to
define gate parameters.
9. To DELETE a step, simply press-and-hold the Encoder to delete the step before the position
marker.
Overdubbing Sequences
You can record over an existing sequence as it plays back. To do so:
1. Load a sequence as described in the ​ FILE Menu ​ discussion (or use the one you just
recorded).
2. Press the ​ PLAY ( ) ​ button.
The sequence starts playing.
3. Press the ​ RECORD ( ) ​ button.
Both the ​ RECORD ( ) ​ and ​ PLAY ( ) ​ buttons are lit solid.
4. As the sequence plays, press a new pad on Tetrapad any time you hear a section you’d like to
replace or change.
Tête overwrites the old step-recorded value with the new ones, allowing you to tweak and
evolve a sequence in real time.
5. Press the ​ RECORD ( ) ​ button when you’re done overdubbing your loop.
Page 155