Intellijel Tete, User Manual

Page: 138 / 173

Tête + Tetrapad Manual
Combo Mode Looping
The Looper works with all three operating modes: Notes Mode, Voltages Mode and Combo Mode. In
Notes and Voltages modes, the Looper records all pad touches since, in these modes, all pads work
together in support of the mode. However, in Combo Mode, each pad can have an entirely different
function, and for this reason, you can enable or disable the Looper for each of the four pads
independently. To do so:
1. In Combo Mode, press the white EDIT button on Tetrapad.
This puts Tetrapad/Tête into Pad Assignment Mode, which enables you to assign any of the
various pad functions to each of the four pads.
Once in Pad Assignment Mode, Tête’s main screen inverts (white background) to indicate that
you are in Pad Assignment Mode.
Below each of the Pad Assignment regions, in the Encoder Bar section, is the per-pad Loop
Assignment display.
2. Press the corresponding Tetrapad encoder to toggle the pad between LOOP and LIVE.
● LOOP ​ : Pads assigned to LOOP are controlled by Tête’s Looper. When in LOOP, you
can record all the pad gestures to the Looper, and all previously recorded gestures play
back.
● LIVE ​ : Pads assigned to LIVE are excluded from Tête’s Looper. This means that any
Pad set to LIVE will not be recorded as part of your loop. In addition, if a pad already
contains recorded data, changing its setting to LIVE prevents that pad’s loop from
playing.
3. Press the white EDIT button on Tetrapad to exit Pad Assignment Mode.
Page 137