Intellijel Tete, User Manual

Page: 57 / 173

Tête + Tetrapad Manual
When designated as a switch, a single pad becomes two independent switches — one on the top half
of the pad (whose value appears at the pad’s left output); and one on the bottom half of the pad
(whose value appears at the pad’s right output). The two switches can be configured to act either as
latched toggle switches or as momentary switches.
Assigning Switch Functionality To A Pad
To assign Switch functionality to one of Tetrapad’s four pads:
1. Put Tête into Combo Mode, as described in ​ Entering Combo Mode ​ , earlier.
2. Press the white EDIT button on Tetrapad to enable pad assignment.
Tête’s screen will invert, and the Level LEDs embedded beneath each pad will play an
animation, indicating the function currently assigned to each pad.
3. Decide which of the four pads you want to make a switch, and rotate its encoder until the
switch graphic is displayed.
On Tête, the graphic for a switch looks like this:
On Tetrapad, the pad animation for a switch looks like this:
4. Press Tetrapad’s white EDIT button to exit pad assignment, and the assigned pad now works
as a pair of switches.
Two four-LED segments are lit on the assigned pad — one segment on the top; and one on
the bottom — indicating that it will now function as a pair of switches.
Page 56