Intellijel Tete, User Manual

Page: 70 / 173

Tête + Tetrapad Manual
Set Notes by Scale
This mode uses Tetrapad’s encoders to auto-map notes to its virtual ‘keys’ & output jacks using the
built-in Scale Library (accessed via the Mode SETUP Menu). You can also assign a root note and
starting octave to those scales. Diatonically shifted versions of the root scale appear at each of the
four outputs. Specifically, the notes appearing at Out 2 are diatonically s2; the notes appearing
at Out 3 are diatonically shifted by +4; and the notes appearing at Out 4 are diatonically shifted by +6.
You can rotate these assignments using Encoder #3, or one of Tête’s assignable CV inputs.
Assigning notes by scale enables you to quickly create little 4-, 8-, 12-, or 16-key ‘keyboards’ that
conform to a particular scale.
When you tell Tetrapad to assign notes
​
w/Scale
​
, Tête’s screen shows the following information:
Page 69