Intellijel Tete, User Manual

Page: 106 / 173

Tête + Tetrapad Manual
Voltages Mode SETUP Menu
When in Voltages Mode, the Mode SETUP Menu
contains the parameters shown to the right. The
configuration of some parameters affects the
availability of other parameters, as indicated.
To select a parameter
​
for editing, turn the encoder to
highlight it.
To edit a parameter,
​
press the encoder on the
highlighted parameter to make it available for editing.
Turn the encoder to select the desired value, and press
the encoder again to apply your change.
Voltages Mode SETUP Menu options are:
● Record ​ : (Looper, Sequencer)
Toggles between two ways of recording voltage
changes.
“Sequencer” enables step-recording of voltage
changes. “Looper” enables real-time recording
of voltage changes.
​
Sequencing
​
and
​
Looping
are both discussed in their own sections, later
in the manual.
The recording method you choose (“Sequencer” or “Looper”) determines which parameters
appear beneath it in the Mode SETUP menu.
If Record = Looper, then these options (as described previously in ​ Combo Mode SETUP
Menu
​
) are available:
● Post Record: ​ (Ovrdub, Play) ​ (Available if Record = Looper)
● Record Wait:
​
(Off, Touch)
​
(Available if Record = Looper)
● Looper Sync: ​ (Off, On) ​ (Available if Record = Looper)
● Loop Length:
​
(n)
​
(Available if Looper Sync = On)
● Loopy Pos. Sync: ​ (On, Off) ​ (Available if Looper Sync = Off)
If Record = Sequencer, then these options are available:
● Seq Clock: ​ (/n, *n)
Divides or multiplies Tête’s clock (which can be either internally generated or
synchronized to an external clock via Tête’s CLK input), as discussed in
​ TEMPO Menu ​ .
Page 105