Intellijel Tete, User Manual

Page: 86 / 173

Tête + Tetrapad Manual
Edit View for Notes Mode
Normally, when you make any changes to a note assignment for a “key”, the edits are applied
instantly and are sent immediately to the Tetrapad outputs. However, there may be instances when
you would like to make changes to your “keyboard” without affecting the output. This is the purpose of
Edit View. Edit View lets you select a pad (“key”) and edit its values without affecting the current
output.
1. Short-press (<1 sec) the white EDIT button on Tetrapad.
Tête + Tetrapad enter Edit View. Tetrapad’s SHIFT LED turns ​ blue ​ and the Note Display area
on Tête’s screen inverts.
2. Touch the pad (“key”) you wish to edit.
3. Edit the pad’s note assignment as previously discussed.
Note editing methodology differs depending on whether you’ve chosen to edit the keyboard
manually, by chord, or by scale (as discussed earlier).
Notice that the values change without being sent to the outputs.
4. Continue editing other Pads, and when you’re done, short-press (<1 sec) the white EDIT
button to exit Edit View.
5. Touch any pad (“key”), and its newly edited note value is sent to the outputs.
Edit View is particularly useful in performance situations, in which you want to dial in some upcoming
changes without affecting what is currently being output. It can be particularly useful when playing
back recordings, since Edit View lets you edit note values without triggering unexpected changes or
overdubbing/overwriting the currently playing recording.
Page 85