Intellijel Tete, User Manual

Page: 115 / 173

Tête + Tetrapad Manual
In Voltages Mode, Tête offers these additional CV assignments:
● Bank Rand* ​ : An input trigger patched into the ​ TRIG ​ jack selects a random voltage bank.
● Bank Fwd* ​ : An input trigger patched into the ​ TRIG ​ jack selects the next higher-numbered
voltage bank.
For example, if Voltage Bank 5 is the current bank, then an input trigger will select
Voltage Bank 6 — sending Bank 6’s voltage values to the eight outputs, and changing the
active bank display on Tetrapad (which numbers Voltage Banks as shown below):
● Bank Rev* ​ : An input trigger patched into the ​ TRIG ​ jack selects the next lower-numbered
voltage bank. For example, if Voltage Bank 3 is the current bank, then an input trigger will
select Voltage Bank 2 — sending Bank 2’s voltage values to the eight outputs, and changing
the active bank display on Tetrapad (which numbers Voltage Banks as shown above).
● Bank X* ​ : An input trigger patched into the ​ TRIG ​ jack selects the voltage bank immediately to
the right of the current bank (moving along the X-axis). Once you reach the far-right bank of
the X-axis, the next trigger will cause the bank select to “wrap around” to the beginning (far
left) of the X-axis. For example, if Voltage Bank 7 is the active bank, then the first trigger will
select Bank 8, and the next trigger will select Bank 5.
● Bank Y* ​ : An input trigger patched into the ​ TRIG ​ jack selects the voltage bank immediately
above the current bank (moving along the Y-axis).
Once you reach the top of the Y-axis, the next trigger will cause the bank select to “wrap
around” to the bottom of the Y-axis.
For example (assuming you use 16 Banks): if Voltage Bank 11 is the current bank, then the
first trigger will select Voltage Bank 15 (the bank immediately above Bank 11, as shown in the
Voltage Bank numbering display, above), and the next trigger will select Bank 3.
CV Setup: RESET Input
Assign a function to Tête’s ​ RESET ​ input jack using the “Reset” setting in Tête’s CV Settings Menu.
The options for the ​ RESET ​ jack are identical to those for the ​ TRIG ​ Input jack, as discussed above.
NOTE: The ​ RESET ​ input jack is assigned to the “Reset” function in all modes by default.
Page 114