Intellijel Tete, User Manual

Page: 139 / 173

Tête + Tetrapad Manual
Record & Play with Touch Sync
1. Press the ​ SETUP ​ MODE ​ button to display the Mode SETUP Menu
2. Rotate Tête’s encoder to select the ​ Record Wait ​ option, and set it to ​ Touch ​ (pressing the
encoder cycles between “Off” and “Touch”).
This tells Tête to wait for a touch before recording begins.
3. Rotate Tête’s encoder to select the ​ Looper Sync ​ option, and set it to ​ Off ​ (pressing the
encoder cycles it on and off).
This allows you to record loops for as long as desired without metric constraint.
4. Press the ​ SETUP ​ MODE ​ button to exit the Mode SETUP Menu.
5. Rotate Tête’s encoder to select ​ Touch Pad ​ (or ​ Touch Bank/Gate ​ if in Voltages Mode).
If you select a “bypass” option (rather than a “touch” option), then touching a pad plays/records
a ‘rest’, as described further in
​ The Encoder Bar (In Looper) ​ .
6. Press the ​ RECORD ( ) ​ button.
It will start to flash, indicating that Tête is now record-enabled and is waiting for you to touch a
pad.
7. Touch a pad to start recording.
Tête’s
​
RECORD ( )
​
button lights solid red (no flashing) to indicate that recording is in
progress.
8. Record your pad touches and gestures for as long as you like.
Page 138