manualshive.com logo in svg

Intel Stratix 10, User Manual

The Intel Stratix 10 is an advanced technology product, boasting unmatched performance and versatility. Enhance your understanding and unleash its potential by accessing the comprehensive user manual, available for free download from our website. Harness the power of Intel Stratix 10 with our user-friendly manual—your key to unlocking its full capabilities.

Share
Download
background image

8.6. Configuring the Attenuation Value (VOD)

This usage model covers configuring attenuation value (VOD) of 0x1 for the PMA

driver.
Setting the attenuation parameter (VOD) which is configurable in the TX Equalizer

block
1. Write 0x84[7:0] = 0x01.
2. Write 0x85[7:0] = 0x40.
3. Write 0x86[7:0] = 0x15.
4. Write 0x87[7:0] = 0x00.
5. Write 0x90[0] = 1’b1.
6. Read 0x8A[7]. It should be 1.
7. Read 0x8B [0] until it changes to 0.
8. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
9. Read 0x8A[7]. It should be 1.

8.7. Configuring the Post Emphasis Value

This usage model covers configuring the Post Emphasis value in the TX Equalizer for

decimal values 2 and -2. The negative decimal value is represented as an 8-bit 2's

complement.
Example 1: Setting the post_tap emphasis of the TX Equalizer with PMA attribute

values of 2 (decimal) and 0x02 (hexadecimal) or -2 (decimal) and 0xFE (hexadecimal)

and PMA attribute code of 0x15
1. Write 0x84[7:0] = 0x02 for 2 (decimal), or write 0x84[7:0] = 0xFE for -2

(decimal).

2. Write 0x85[7:0] = 0x80.
3. Write 0x86[7:0] = 0x15.
4. Write 0x87[7:0] = 0x00.
5. Write 0x90[0] = 1’b1.
6. Read 0x8A[7]. It should be 1.
7. Read 0x8B [0] until it changes to 0.
8. Write 0x8A[7] to 1 to clear the 0x8A[7] flag.
9. Read 0x8A[7]. It should be 1.
Example 2: Setting the post_tap emphasis of the TX Equalizer with PMA attribute

values of -18 (decimal) and 0xEE (2’s complement) and PMA attribute code of 0x15
10. Write 0x84[7:0] = 0xEE.
11. Write 0x85[7:0] = 0x80.
12. Write 0x86[7:0] = 0x15.
13. Write 0x87[7:0] = 0x00.
14. Write 0x90[0] = 1’b1.
15. Read 0x8A[7]. It should be 1

8. Dynamic Reconfiguration Examples

UG-20056 | 2019.02.04

Send Feedback

Intel

®

 Stratix

®

 10 E-Tile Transceiver PHY User Guide

153

Summary of Contents for Stratix 10





































































































































































































































Reviews:

No comments

Related manuals for Stratix 10

RadiSys EPC-31 Hardware Reference Manual preview
EPC-31
Brand: RadiSys Pages: 44
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
Jaycar Electronics Duinotech Lilypad Plus XC3920 Quick Start preview
Duinotech Lilypad Plus XC3920
Brand: Jaycar Electronics Pages: 2
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
ADS Technologies API-800 Installation Manual preview
API-800
Brand: ADS Technologies Pages: 21
LaView LV-KN series Quick Start Manual preview
LV-KN series
Brand: LaView Pages: 2
StetSom STX2448 User Manual preview
STX2448
Brand: StetSom Pages: 18
Tektronix 7B87 Instruction Manual preview
7B87
Brand: Tektronix Pages: 143
WEIGL Nanotec Instruction Manual preview
Nanotec
Brand: WEIGL Pages: 6
Extron electronics DMP 64 Plus User Manual preview
DMP 64 Plus
Brand: Extron electronics Pages: 99
Kvadrat Sonesse 40 I/O Manual preview
Sonesse 40 I/O
Brand: Kvadrat Pages: 9
Huawei CR-P4CF Specifications preview
CR-P4CF
Brand: Huawei Pages: 2
Cambium Networks PMP 450d Series User Manual preview
PMP 450d Series
Brand: Cambium Networks Pages: 215
StarTech.com PEX2PCI4 User Manual preview
PEX2PCI4
Brand: StarTech.com Pages: 13
Datoptic EBOX-R5 User Manual preview
EBOX-R5
Brand: Datoptic Pages: 5
Aardvark Paylink Lite 2 User Manual preview
Paylink Lite 2
Brand: Aardvark Pages: 12
Siemens SPCN910 Manual preview
SPCN910
Brand: Siemens Pages: 5
Siemens SPEEDSTREAM SS1021 User Manual preview
SPEEDSTREAM SS1021
Brand: Siemens Pages: 40

Brands by name

Popular brands

Load more brands