Intel Stratix 10 User Manual Download

Page: 10 / 228

1.2.2. Stratix 10 MX H-Tile and E-Tile Configurations

Intel Stratix 10 MX devices combine the programmability and flexibility of Intel Stratix

10 FPGAs and SoCs with 3D stacked high-bandwidth memory 2 (HBM2). The dynamic

random access memory (DRAM) tile is physically connected to the FPGA using Intel's

Embedded Multi-die Interconnect Bridge (EMIB) technology.

Figure 5.

Intel Stratix 10 MX Device with 3 E-Tiles, 1 H-Tile (96 Transceiver Channels)

and 2 HBM2

E-Tile

(24 Channels)

HSSI_2_0

Package Substrate

EMIB

Core Fabric

MX 1650 UF55 (F2912)

HBM2

E-Tile

(24 Channels)

HSSI_2_1

EMIB

HBM2

MX 2100 UF55 (F2912)

E-Tile

(24 Channels)

HSSI_0_1

H-Tile

(24 Channels)

HSSI_0_0

4 GByte

There is no package migration between Intel Stratix 10 MX and Intel Stratix 10 TX

device families (H-Tile and E-Tile) or Intel Stratix 10 GX/SX device families.

1.3. Transceiver Counts in Stratix 10 TX/MX Devices

Table 3.

Transceiver Counts in Intel Stratix 10 TX Devices with E-Tiles (NF43, SF50,

UF50, YF55)

The number in the Intel Stratix 10 TX Device Name column indicates the device's Logic Element (LE) count (in

thousands LEs).

Intel Stratix 10 TX Device Name

F1760

NF43

(42.5 mm x 42.5 mm)

Transceivers (E, H)

F2397

SF50, UF50

(50 mm x 50 mm)

Transceivers (E, H)

F2912

YF55

(55 mm x 55 mm)

Transceivers (E, H)

TX 400

24, 24

N/A

TX 650

24, 24

N/A

TX 850

24, 24

48, 24

N/A

TX 1100

24, 24

48, 24

N/A

TX 1650

N/A

72, 24

N/A

TX 2100

N/A

72, 24

N/A

TX 2500

N/A

72, 24

120, 24

TX 2800

N/A

72, 24

120, 24

1. Intel

Stratix

10 E-Tile Transceiver PHY Overview

UG-20056 | 2019.02.04

Intel

Stratix

10 E-Tile Transceiver PHY User Guide

Send Feedback

Summary of Contents for Stratix 10





































































































































































































































Search results

Summary of Contents for Stratix 10

Reviews:

Related manuals for Stratix 10

Brands by name

Popular brands

Intel Stratix 10, User Manual

Search results

Summary of Contents for Stratix 10

Reviews:

Related manuals for Stratix 10

Brands by name

Popular brands