Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon Technical Manual Download

Page: 86 / 184

System BIOS

Intel® Server Boards SE7320SP2 and SE7525GP2

Revision

4.0

4.4.3.2

Boot Device Priority Sub-menu Selections

Table 36. BIOS Setup, Boot Device Priority Sub-menu Selections

Feature

Options

Help Text

Description

Boot Device Priority

Boot Device

Varies

Specifies the boot sequence from the
available devices.
A device enclosed in parenthesis has
been disabled in the corresponding type
menu.

Number of entries will vary based on
system configuration.

Nth Boot Device

Varies

Specifies the boot sequence from the
available devices.
A device enclosed in parenthesis has
been disabled in the corresponding type
menu.

Note: The boot sequence will be reset by the BIOS whenever a controller card that is listed in
the boot menu is changed or removed. Return to this menu any time a configuration change is
made to a bootable controller card.

4.4.3.2.1

Hard Disk Drive Sub-menu Selections

Table 37. BIOS Setup, Hard Disk Drive Sub-Menu Selections

Feature

Options

Help Text

Description

Hard Disk Drives

Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

Nth Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

4.4.3.2.2

Removable Drive Sub-menu Selections

Table 38. BIOS Setup, Removable Drives Sub-menu Selections

Feature

Options

Help Text

Description

Removable Drives

Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

Nth Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

























































































































































































Search results

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Reviews:

Related manuals for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Brands by name

Popular brands

Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon, Technical Manual

Search results

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Reviews:

Related manuals for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Brands by name

Popular brands