manualshive.com logo in svg

Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon, Technical Manual

Share
Download
Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon Technical Manual Download Page 10

Contents 

Intel® Server Boards SE7320SP2 and SE7525GP2 

  

Revision 

4.0 

x 

Table 23. BIOS Setup, Advanced Menu Options........................................................................ 63

 

Table 24. BIOS Setup, Processor Configuration Sub-menu Options ......................................... 63

 

Table 25. BIOS Setup IDE Configuration Menu Options ............................................................ 65

 

Table 26. Mixed PATA-SATA Configuration with only Primary PATA ........................................ 66

 

Table 27. BIOS Setup, IDE Device Configuration Sub-menu Selections ................................... 67

 

Table 28. BIOS Setup, Floppy Configuration Sub-menu Selections........................................... 68

 

Table 29. BIOS Setup, Super I/O Configuration Sub-menu........................................................ 69

 

Table 30. BIOS Setup, USB Configuration Sub-menu Selections .............................................. 69

 

Table 31. BIOS Setup, USB Mass Storage Device Configuration Sub-menu Selections ........... 70

 

Table 32. BIOS Setup, PCI Configuration Sub-menu Selections ............................................... 71

 

Table 33. BIOS Setup, Memory Configuration Sub-menu Selections......................................... 72

 

Table 34. BIOS Setup, Boot Menu Selections ............................................................................ 73

 

Table 35. BIOS Setup, Boot Settings Configuration Sub-menu Selections ................................ 73

 

Table 36. BIOS Setup, Boot Device Priority Sub-menu Selections ............................................ 74

 

Table 37. BIOS Setup, Hard Disk Drive Sub-Menu Selections................................................... 74

 

Table 38. BIOS Setup, Removable Drives Sub-menu Selections............................................... 74

 

Table 39. BIOS Setup, CD/DVD Drives Sub-menu Selections ................................................... 75

 

Table 40. BIOS Setup, Security Menu Options........................................................................... 75

 

Table 41. BIOS Setup, Server Menu Selections.........................................................................76

 

Table 42. BIOS Setup, System Management Sub-menu Selections .......................................... 78

 

Table 43. BIOS Setup, Serial Console Features Sub-menu Selections ..................................... 79

 

Table 44. BIOS Setup, Event Log Configuration Sub-menu Selections ..................................... 80

 

Table 45. BIOS Setup, Exit Menu Selections .............................................................................81

 

Table 46. Supported Wake Events ............................................................................................. 92

 

Table 47. Security Features Operating Model ............................................................................ 93

 

Table 48. Supported Channel Assigments ............................................................................... 103

 

Table 49. LAN Channel Capacity.............................................................................................. 105

 

Table 50. LAN Channel Specifications ..................................................................................... 106

 

Table 51. PEF Action Priorities ................................................................................................. 110

 

Table 52. mBMC Factory Default Event Filters......................................................................... 110

 

Table 53. Power Control Initiators............................................................................................. 114

 

Table 54. System Reset Sources and Actions..........................................................................115

 

Table 55. Chassis ID LEDs....................................................................................................... 118

 

Table 56. Fault/Status LED....................................................................................................... 118

 

Table 57. mBMC Built-in Sensors.............................................................................................122

 

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands