manualshive.com logo in svg

Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon, Technical Manual

The Intel SE7320SP2 - 800MHz Ecc Ddr Xeon is a high-performance server motherboard designed for professional use. To ensure smooth operation and optimal performance, it is essential to have the official Technical Manual. You can easily download the free manual from our manualshive.com, providing comprehensive instructions and information for efficient usage.

Share
Download
background image

Intel® Server Boards SE7320SP2 and SE7525GP2 

System BIOS 

Revision 4.0 

 

 

89

fixed location. Upon entry into the user binary, DX contains a ‘token’ that points to the reserved 
bits. 

4.9  Operating System Boot, Sleep, and Wake 

4.9.1 

Microsoft Windows* Compatibility 

Intel Corporation and Microsoft Corporation co-author design guides for system designers using 
Intel

®

 processors and Microsoft* operating systems. These documents are updated yearly to 

address new requirements and current trends.  

PC200x specifications are intended for systems that are designed to work with Windows 2000* 
and Windows XP* class operating systems. The Hardware Design Guide (HDG) for the 
Windows XP platform is intended for systems that are designed to work with Windows XP class 
operating systems. Each specification classifies the systems further and has requirements 
based on the intended usage for that system. For example, a server system that will be used in 
small home/office environments has different requirements than one used for enterprise 
applications. The BIOS supports HDG 3.0.  

4.9.2 Advanced 

Configuration 

and Power Interface (ACPI) 

The BIOS is ACPI 2.0c compliant. The primary role of the BIOS is to provide ACPI tables. 
During POST, the BIOS creates the ACPI tables and locates them in extended memory (above 
1 MB). The location of these tables is conveyed to the ACPI-aware operating system through a 
series of tables located throughout memory. The format and location of these tables is 
documented in the publicly available ACPI specification.  

To prevent conflicts with a non-ACPI-aware operating system, the memory used for the ACPI 
tables is marked as “reserved” in the INT 15h, function E820h.  

As described in the ACPI specification, an ACPI-aware operating system generates an SMI to 
request that the system be switched into ACPI mode. The BIOS responds by setting up all 
system (chipset) specific configuration required to support ACPI, and sets the SCI_EN bit as 
defined by the ACPI specification. The system automatically returns to legacy mode on hard 
reset or power-on reset. 

There are three runtime components to ACPI: 

ƒ

 

ACPI Tables

: These tables describe the interfaces to the hardware. ACPI tables can 

make use of a p-code type of language, the interpretation of which is performed by the 
operating system. The operating system contains and uses an ACPI Machine Language 
(AML) interpreter that executes procedures encoded in AML and stored in the ACPI 
tables. AML is a compact, tokenized, abstract machine language. The tables contain 
information about power management capabilities of the system, APICs, and bus 
structure. The tables also describe control methods that operating systems can use to 
change PCI interrupt routing, control legacy devices in Super I/O, find out the cause of 
wake events, and handle PCI hot plugging, if applicable.  

ƒ

 

ACPI Registers

: The constrained part of the hardware interface, described (at least in 

location) by the ACPI tables.  

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

























































































































































































Reviews:

No comments

Related manuals for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Acer Altos R700 Series Product Manual preview
Altos R700 Series
Brand: Acer Pages: 80
Acer Altos G700 series Rack Installation Instructions preview
Altos G700 series
Brand: Acer Pages: 14
Acer Extensa 500 System Manual preview
Extensa 500
Brand: Acer Pages: 103
Acer Altos R720 Series Installation & Configuration Manual preview
Altos R720 Series
Brand: Acer Pages: 104
Xerox EX Printing Manual preview
EX
Brand: Xerox Pages: 40
NEC NEAX2000 IVS Series System Manual preview
NEAX2000 IVS Series
Brand: NEC Pages: 160
Lucent Technologies Definity 8510T User Manual preview
Definity 8510T
Brand: Lucent Technologies Pages: 85
SEH SEH InterCon PS54a-G Hardware Installation Manual preview
SEH InterCon PS54a-G
Brand: SEH Pages: 24
DGT REVELATION II User Manual preview
REVELATION II
Brand: DGT Pages: 33
Supermicro SuperServer E300-9C User Manual preview
SuperServer E300-9C
Brand: Supermicro Pages: 113
Intergraph InterServe 600 Series System Reference Manual preview
InterServe 600 Series
Brand: Intergraph Pages: 104
Hamlet HPS01UU2 User Manual preview
HPS01UU2
Brand: Hamlet Pages: 76
Sony VGF-HS1 - Vaio Home Server Specifications preview
VGF-HS1 - Vaio Home Server
Brand: Sony Pages: 2
Sony VSR-2000 Operating Instructions Manual preview
VSR-2000
Brand: Sony Pages: 28
Sony WG-C10 Series Help Manual preview
WG-C10 Series
Brand: Sony Pages: 313
Meinberg SyncFire 1200 Manual preview
SyncFire 1200
Brand: Meinberg Pages: 55
Supermicro H8DGT-HLF User Manual preview
H8DGT-HLF
Brand: Supermicro Pages: 72
Supermicro H8DSL-HTi User Manual preview
H8DSL-HTi
Brand: Supermicro Pages: 78

Brands by name

Popular brands

Load more brands