Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon Technical Manual Download

Page: 92 / 184

System BIOS

Intel® Server Boards SE7320SP2 and SE7525GP2

Revision

4.0

4.4.5.4

Event Log Configuration Sub-menu Selections

Table 44. BIOS Setup, Event Log Configuration Sub-menu Selections

Feature

Options

Help Text

Description

Event Log Configuration

Clear All Event Logs

Disabled

Enabled

Setting this to Enabled will clear the system
event log during the next boot.

Option will be
automatically set back to
Disabled at the next
reboot.

Clear Event Log When
Full

Disabled

Enabled

If enabled, BIOS will clear system event log
upon system boot when it is full

BIOS Event Logging

Disabled

Enabled

Select enabled to allow logging of BIOS
events.

Enables BIOS to log
events to the SEL. This
option controls BIOS
events only.

Critical Event Logging

Disabled

Enabled

If enabled, BIOS will detect and log events
for system critical errors. Critical errors are
fatal to system operation. These errors
include PERR, SERR, ECC.

Enable SMM handlers to
detect and log events to
SEL.

ECC Event Logging

Disabled

Enabled

Enables or disables ECC event logging.

Grayed out if "Critical
Event Logging" option is
disabled.

PCI Error Logging

Disabled

Enabled

Enables or disables PCI error logging.

Grayed out if "Critical
Event Logging" option is
disabled.

FSB Error Logging

Disabled

Enabled

Enables or disables front side bus error
Logging.

Grayed out if "Critical
Event Logging" option is
disabled.

Hublink Error Logging

Disabled

Enabled

Enables or disables hublink error logging.

Grayed out if "Critical
Event Logging" option is
disabled.

Timestamp Clock
Sync. event

Enabled

Disabled

Enables or disables logging of the timestamp
clock synchronization. Event for mBMC clock
synchronization with RTC

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

























































































































































































Search results

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Reviews:

Related manuals for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Brands by name

Popular brands

Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon, Technical Manual

Search results

Summary of Contents for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Reviews:

Related manuals for SE7320SP2 - 800MHZ Ecc Ddr Xeon

Brands by name

Popular brands