Configuration and Image File Commands
70
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged
EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination URL.
The entire copying process may take several minutes and differs from protocol to protocol
and from network to network.
*.prv and *.sys files cannot be copied.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, you cannot copy
if one of the following conditions exist:
The source file and destination file are the same file.
xmodem:
is the destination file. The source file can be copied to
image
,
boot
and
null:
only.
tftp://
is the source file and destination file on the same copy.
The following table describes copy characters:
Copying an Image File from a Server to Flash Memory
To copy an image file from a server to flash memory, use the
copy
source-url
image
command.
Copying a Boot File from a Server to Flash Memory
To copy a boot file from a server to flash memory, enter the
copy
source-url
boot
command.
Copying a Configuration File from a Server to the Running Configuration File
Character
Description
!
For network transfers, indicates that the copy process is taking place. Each exclamation
point indicates successful transfer of ten packets (512 bytes each).
.
For network transfers, indicates that the copy process timed out. Generally, many
periods in a row means that the copy process may fail.
