Intel SBCEGBESW1, Manual

Page: 223 / 424

RMON Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 207
•
type — Specifies the method used for sampling the selected variable and calculating
the value to be compared against the thresholds. Possible values are absolute and
delta .
•
If the method is absolute , the value of the selected variable is compared directly with
the thresholds at the end of the sampling interval. If the method is delta , the selected
variable value of the last sample is subtracted from the current value, and the
difference is compared with the thresholds.
•
direction — Specifies the alarm that may be sent when this entry is first set to valid.
Possible values are rising , rising-falling and falling .
•
If the first sample (after this entry becomes valid) is greater than or equal to rthreshold
and direction is equal to rising or rising-falling , a single rising alarm is generated. If
the first sample (after this entry becomes valid) is less than or equal to fthreshold and
direction is equal to falling or rising-falling , a single falling alarm is generated.
•
name — Specifies the name of the person who configured this alarm. If unspecified,
the name is an empty string.
Default Configuration
The type is absolute .
The startup direction is rising-falling .
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
•
Alarm index — 1000
•
Variable identifier — Intel
•
Sample interval — 360000 seconds
•
Rising threshold — 1000000
•
Falling threshold — 1000000
•
Rising threshold event index — 10
•
Falling threshold event index — 20
Console(config)# rmon alarm 1000 Intel 360000 1000000 1000000 10 20