Ethernet Configuration Commands
100
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
User Guidelines
Use the
port storm-control broadcast rate
Interface Configuration (Ethernet) mode
command, to set the maximum allowable broadcast rate.
Use the
port storm-control include-multicast
Global Configuration mode command to
enable counting multicast packets in the storm control calculation.
Example
The following example enables broadcast storm control on port 1 of a device.
port storm-control broadcast rate
The
port storm-control broadcast rate
Interface Configuration (Ethernet) mode
command configures the maximum broadcast rate. To restore the default configuration,
use the
no
form of this command.
Syntax
port storm-control broadcast rate
rate
no port storm-control broadcast rate
Parameters
•
rate
— Maximum kilobits per second of broadcast and multicast traffic on a port.
(Range of 3500-1000000)
Default Configuration
The default storm control broadcast rate is 3500 Kbits/Sec.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
Use the
port storm-control broadcast enable
Interface Configuration mode command to
enable broadcast storm control.
Console(config)#
interface ethernet ext.
1
Console(config-if)#
port storm-control broadcast enable
