QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
175
Command Mode
Policy-map Configuration mode
User Guidelines
Before modifying a policy for an existing class or creating a policy for a new class, use the
policy-map
Global Configuration mode command to specify the name of the policy map
to which the policy belongs and to enter the Policy-map Configuration mode.
Use the
service-policy
(Ethernet, Port-channel) Interface Configuration mode command
to attach a policy map to an interface. Use an existing class map to attach classification
criteria to the specified policy map and use the
access-group
parameter to modify the
classification criteria of the class map.
If this command is used to create a new class map, the name of an IP or MAC ACL must
also be specified.
Example
The following example defines a traffic classification called class1 with an access-group
called enterprise. The class is in a policy map called policy1.
show policy-map
The
show policy-map
User EXEC command displays the policy maps.
Syntax
show policy-map
[
policy-map-name
[
class
class-name
]]
Parameters
•
policy-map-name
— Specifies the name of the policy map to be displayed.
•
class-name
— Specifies the name of the class whose QoS policies are to be displayed.
Default Configuration
This command has no default configuration.
Console(config)#
policy-map
policy1
Console (config-pmap)#
class
class1
access-group
enterprise
