Ethernet Configuration Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
85
Example
The following example enables auto-negotiation on Ethernet port 1.
flowcontrol
The
flowcontrol
Interface Configuration (Ethernet, port-channel) mode command
configures flow control on a given interface. To disable flow control, use the
no
form of
this command.
Syntax
flowcontrol
{
auto | on
|
off
}
no flowcontrol
Parameters
•
auto
— Indicates auto-negotiation
•
on
— Enables flow control.
•
off
— Disables flow control.
Default Configuration
Flow control is off.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
Negotiation should be enabled for
flow control auto
.
Example
In the following example, flow control is enabled on port 1.
Console(config)#
interface ethernet ext.
1
Console(config-if)#
negotiation
Console(config)#
interface ethernet ext.
1
Console(config-if)#
flowcontrol on
