SNMP Commands
246
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
snmp-server host
The
snmp-server host
Global Configuration mode command specifies the recipient of
Simple Network Management Protocol Version 1 or Version 2 notifications. To remove
the specified host, use the
no
form of this command.
Syntax
snmp-server host
{
ip-address
|
hostname
}
community-string
[
traps | informs
] [
1 | 2
]
[
udp-port
port
] [
filter
filtername
] [
timeout
seconds
] [
retries
retries
]
no snmp-server host
{
ip-address
|
hostname
} [
traps | informs
]
Parameters
•
ip-address
— Specifies the IP address of the host (targeted recipient).
•
hostname
— Specifies the name of the host. (Range:1-158 characters)
•
community-string
— Specifies a password-like community string sent with the
notification operation.
(Range: 1-20)
•
traps
— Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps
are sent to the host.
•
informs
— Indicates that SNMP informs are sent to this host. Not applicable to
SNMPv1.
•
1
— Indicates that SNMPv1 traps will be used.
•
2
— Indicates that SNMPv2 traps will be used. If
•
port
—Specifies the UDP port of the host to use. If unspecified, the default UDP port
number is 162.
(Range:1-65535)
•
filtername
— Specifies a string that defines the filter for this host. If unspecified,
nothing is filtered.
(Range: 1-30 characters)
•
seconds
— Specifies the number of seconds to wait for an acknowledgment before
resending informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-
300)
•
retries — Specifies the maximum number of times to resend an inform request. If
unspecified, the default maximum number of retries is 3. (Range: 0-255)
Default Configuration
This command has no default configuration.
