SNMP Commands
240
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
no snmp-server group
groupname
{
v1 | v2 | v3
[
noauth | auth | priv
]}
Parameters
•
groupname
—Specifies the name of the group (Range: 1-30 characters).
•
v1
— Indicates the SNMP Version 1 security model.
•
v2
— Indicates the SNMP Version 2 security model.
•
v3
— Indicates the SNMP Version 3 security model.
•
noauth
— Indicates no authentication of a packet. Applicable only to the SNMP
Version 3 security model.
•
auth
— Indicates authentication of a packet without encrypting it. Applicable only to
the SNMP Version 3 security model.
•
priv
— Indicates authentication of a packet with encryption. Applicable only to the
SNMP Version 3 security model.
•
name
— Specifies the context of a packet. The following context is supported: Router.
If the context name is unspecified, all contexts are defined.
•
readview
— Specifies a string that is the name of the view that enables only viewing
the contents of the agent. If unspecified, all objects except for the community-table
and SNMPv3 user and access tables are available.
•
writeview
— Specifies a string that is the name of the view that enables entering data
and configuring the contents of the agent. If unspecified, nothing is defined for the
write view.
•
notifyview
— Specifies a string that is the name of the view that enables specifying an
inform or a trap. If unspecified, nothing is defined for the notify view. Applicable only
to the SNMP Version 3 security model.
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
