manualshive.com logo in svg

Intel SBCEGBESW1, Manual

Share
Download
Intel SBCEGBESW1 Manual Download Page 379

VLAN Commands

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

363

Default Configuration

VID=1.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The command adds the port as a member in the VLAN. If the port is already a member in 

the VLAN (not as a native), it should be first removed from the VLAN. 

Example

The following example configures VLAN number 123 as the native VLAN when Ethernet 

port 1 is in trunk mode.

switchport general allowed vlan

The 

switchport general allowed vlan 

Interface Configuration mode command adds or 

removes VLANs from a general port.

Syntax

switchport general allowed vlan add 

vlan-list 

[

tagged

 | 

untagged

]

switchport general allowed vlan remove 

vlan-list

Parameters

•

add

 

vlan-list

 — Specifies the list of VLAN IDs to be added. Separate nonconsecutive 

VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

•

remove

 vlan-list

 — Specifies the list of VLAN IDs to be removed. Separate 

nonconsecutive VLAN IDs with a comma and no spaces. A hyphen designates a 

range of IDs.

•

tagged

 — Indicates that the port transmits tagged packets for the VLANs.

•

untagged

 — Indicates that the port transmits untagged packets for the VLANs.

Console(config)# 

interface ethernet ext.

1

Console(config-if)# 

switchport trunk native vlan

 123

Summary of Contents for SBCEGBESW1









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands