ACL Commands
50
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
service-acl
The
service-acl
Interface Configuration mode command applies an ACL to the input
interface. To detach an ACL from an input interface, use the no form of this command.
Syntax
service-acl
{
input
acl-name
}
no service-acl
{
input
}
Parameters
•
acl-name
—Specifies the ACL to be applied to the input interface.
Default Configuration
This command has no default configuration.
Command Mode
Interface (Ethernet, port-channel) Configuration mode.
User Guidelines
In advanced mode, when an ACL is bound to an interface, the port trust mode is set to
trust 12-13 and not to 12.
Example
The following example binds (services) an ACL to VLAN 2.
show access-lists
The
show access-lists
Privileged EXEC mode command displays access control lists
(ACLs) defined on the device.
Syntax
show access-lists
[
name
]
Console(config)#
interface vlan
2
Console(config-if)#
service-acl input
macl1
