QoS Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
177
User Guidelines
Action serviced to a class, so that if an IP packet arrives, the queue is assigned per DSCP.
If a non-IP packet arrives, the queue is assigned per CoS (VPT).
Example
The following example configures the trust state for a class called class1 in a policy map
called policy1.
set
The
set
Policy-map Class Configuration mode command sets new values in the IP packet.
Syntax
set
{
dscp
new-dscp
|
queue
queue-id
|
cos
new-cos
}
no set
Parameters
•
new-dscp
— Specifies a new DSCP value for the classified traffic. (Range: 0-63)
•
queue-id
— Specifies an explicit queue ID for setting the egress queue.
•
new-cos
— Specifies a new user priority for marking the packet. (Range: 0-7)
Default Configuration
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
User Guidelines
This command is mutually exclusive with the
trust
Policy-map Class Configuration
command within the same policy map.
Console (config)#
policy-map
policy1
Console (config-pmap)#
class
class1
Console (config-pmap-c)#
trust cos-dscp
