manualshive.com logo in svg

Intel SBCEGBESW1, Manual

Share
Download
Intel SBCEGBESW1 Manual Download Page 78

Clock Commands

62

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Example

The following example enables SNTP anycast clients. 

sntp client enable (Interface)

The

 sntp client enable 

Interface Configuration (Ethernet, port-channel, VLAN) mode 

command enables the Simple Network Time Protocol (SNTP) client on an interface. This 

applies to both receive broadcast and anycast updates. To disable the SNTP client, use the 

no

 form of this command.

Syntax

sntp client enable

no sntp client enable

Default Configuration

The SNTP client is disabled on an interface.

Command Mode

Interface Configuration (Ethernet, port-channel, VLAN) mode

User Guidelines

Use the 

sntp broadcast client enable

 Global Configuration mode command to enable 

broadcast clients globally.

Use the 

sntp anycast client enable

 Global Configuration mode command to enable 

anycast clients globally.

Example

The following example enables the SNTP client on Ethernet port 3. 

console(config)# 

sntp anycast client enable

C

onsole(config)# 

interface ethernet

 

ext.3

Console(config-if)# 

sntp client enable

Summary of Contents for SBCEGBESW1









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands