29
Mas
terContr
ol
Configur
ation
NAMING CAMERAS
To name a camera, go to the Setup page (it doesn’t matter which tab is selected).
Under the view screen is the name of the currently selected camera. To change the
name, highlight it, type the new name, and click Apply Name (see Figure 13).
By default, cameras are named Camera1, Camera2, Camera3, and so on (with the
number referring to the input that the camera is hooked up to). The camera’s name
is limited to 32 characters if you decide to change it. However, a relatively long
camera name may automatically be abbreviated to fit into certain areas of the
Monitor and Schedule pages.
Figure 13
You can name your
camera inputs from
any tab on the Setup
page.
