100
CAMERA DISPLAY TOURS
Saved camera view configurations can be used to create tours. To create a tour,
complete the following steps:
1.
Select Tours from the Config menu and click New.
2.
Select the first view in the tour on the left and click the right arrows to
move it to the right. Repeat for the second view in the tour, and then each
additional view that you want to include in the tour.
3.
You can move a view in the order by selecting it on the right and clicking
Move Up or Move Down. You can remove a view by selecting it on the
right and clicking Remove.
4.
Enter a tour name.
5.
Select a time interval.
6.
Click OK.
To start a tour, select Tours from the Config menu, select a tour, and click Begin.
To pause a tour, click the Pause button on the Tour bar at the bottom of the screen
(see Figure 47); this does not freeze video. To resume the tour, click the Play
button on the Tour bar or change the view by selecting the left or right arrow. To
end the tour, click Stop on the Tour bar.
Figure 47
The Tour bar
appears at the
bottom of the
screen when you
start a tour.
