16
Figure 6
After you enter
a valid ID
and password,
MasterControl
scans for con-
nected cameras.
Your DVXi system has some of the same capabilities as a regular
personal computer. However, it is recommended that you do not use
your DVXi system for anything other than operating the
MasterControl software. Wandering to other parts of the system could
damage DVXi’s intended functionality—so do this only at your own
risk. See the “Security Features” section of the “MasterControl Con-
figuration” chapter for more information.
Caution
Tip
Be sure to change your DVXi user ID and password immediately.
See the “Defining MasterControl Users” section of the “MasterControl
Configuration” chapter for information on how to do this. The de-
fault administrator password is “letmein” for both Windows and
MasterControl.
RUNNING THE MASTERCONTROL APPLICATION
When you turn on the DVXi system for the first time, MasterControl automati-
cally runs (you can also manually run the application from Start, Programs, and
MasterControl). When you see the Enter Password window, enter “administrator”
for User and “letmein” for Password. MasterControl then scans for connected cam-
eras (see Figure 6) and opens up to the Monitor page. Now you are ready to con-
figure MasterControl for daily use.
