Intec ColorCut SC5000 Series, User Manual

Page: 61 / 89

Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 61
10.3 The Live Preview Window
Upon launching ColorCut Pro for the first time each day, the software will acquire the
IP address of the Live Video Feed from the Vision3 registration sensor/CCD camera.
This may take 30 secs to 2 mins. During this period the Live Video preview may
appear blank
3
.
During the connecting period, the Live
Preview window may change to display
a ‘Connecting Please Wait’ message.
3a
Once connected it will display the echo
of the Live Video feed (often the cutting
strip to start). 3b
NOTE:
If you have not set up either the
Wi-Fi Hot Spot, or where applicable the
Wi-Fi Direct connection to the camera, then
ColorCut will not be able to connect to the
camera
3c
.
Set up your Hot-Spot as previously detailed
at the start of this manual, and try again.
3
3a
3c
3b