Intec ColorCut SC5000 Series, User Manual

Page: 75 / 89

Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................Page No: 75
15
The START or SCAN QR CODE
15
control is a dynamic button which changes
based upon the mode you are working in.
IF you have opened the
Cutting file directly from
your Graphics application,
or you have manually
entered a JOB ID ( Section
10.16 in this manual ) to
manually load a job be cut.
The JOB preview area
2
will show the job which will
be sent to the cutter, and
the button
15
will display
[START] enabling you to
start cutting.
This is also known as
DIRECT Cutting Mode.
Alternatively, if you have
opened ColorCut Pro Stand
Alone ( Job SERVER Mode )
there will be no preview of a
job in the preview area
2
.
In Job SERVER mode the
button
15
will show [ Scan
QR Code ], which when
clicked, will load a sheet and
scan the QR code to retrieve
the job and load it into the
cutting preview area
2
,
then start cutting as defined
in the PRODUCTIVITY set-
up.
The QR code
16
icon enables you to change the mode of the current instance of
ColorCut Pro.
Clicking the icon
16
, when NO job is shown in the preview
window (When the ColorCut is in Job Server Mode), enables you
to manually enter a QR code to pre-load the job.
This enables you to check line/action assignments prior to large productions .
See section 13 later in this manual for details on Retrieving files using JOB ID).
Clicking the Icon
16
, when a JOB is loaded in the Preview Window (the cutter is in
DIRECT Cutting Mode). Switches to Job SERVER mode (ready to Scan a QR code).
10.15 START / SCAN QR CODE
2
10.16 SWITCH MODES
15
16