INSYS MoRoS GPRS 2.1 PRO Manual Download Page 35

Page: 35 / 144

MoRoS GPRS 2.1 PRO

Mounting

Mounting the device to the DIN rail

How to mount the MoRoS GPRS 2.1 PRO to a DIN rail:

Position the device at the DIN rail as seen in the following diagram.
There are two snap-in hooks at the upper and lower edge of the DIN
rail groove of MoRoS GPRS 2.1 PRO. Hook the upper one into place
behind the upper edge of the DIN rail.

Lift the MoRoS GPRS 2.1 PRO perpendicular to the DIN rail until the
two lower, flexible snap-in hooks engage in the DIN rail.



The MoRoS GPRS 2.1 PRO is now readily mounted.

Connecting the power supply



The device has already been mounted to the DIN rail.



The power supply is connected and switched off.

Connect the ground lead of the power supply to the terminal "GND".

Connect the plus pole of the power supply to the terminal for the po-
wer supply.



The MoRoS GPRS 2.1 PRO is now connected to the power supply.

Disconnecting the power supply

Summary of Contents for MoRoS GPRS 2.1 PRO

















































































































































Search results

Summary of Contents for MoRoS GPRS 2.1 PRO

Reviews:

Related manuals for MoRoS GPRS 2.1 PRO

Brands by name

Popular brands

INSYS MoRoS GPRS 2.1 PRO, Manual

Search results

Summary of Contents for MoRoS GPRS 2.1 PRO

Reviews:

Related manuals for MoRoS GPRS 2.1 PRO

Brands by name

Popular brands