INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 28 / 144

Function Overview MoRoS GPRS 2.1 PRO
8 Function Overview
The MoRoS GPRS 2.1 PRO provides you with the following functions:

Configuration via web interface or ASCII configuration file
All functions of the MoRoS GPRS 2.1 PRO can be configured and set
via a web interface. The access to the web interface is protected with a
user name and password query. The TCP port which is used to access
the web interface can be set freely. Alternatively, an ASCII file can also
be uploaded, which contains the configuration of the MoRoS GPRS 2.1
PRO.

Serial Ethernet gateway
The MoRoS GPRS 2.1 PRO can output arriving data from a certain
network port at the serial interface. Also, data arriving at the serial in-
terface are sent to an IP remote terminal. Together with the INSYS
VCom driver, the serial Ethernet gateway enables the transmission of a
serial connection via a network.

DHCP server
Ethernet devices connected to the switch can retrieve their IP address
automatically from the MoRoS GPRS 2.1 PRO.

DHCP client
The MoRoS GPRS 2.1 PRO retrieves IP addresses from the network
automatically at the LAN ext interface optionally.

Static IP address
A static IP address can be configured for the LAN ext interface of the
MoRoS GPRS 2.1 PRO.

DSL leased line operation
The MoRoS GPRS 2.1 PRO can establish and maintain a permanent
connection via a DSL ("PPP over Ethernet") connection. A DSL modem
can be connected via the LAN ext interface for this. This makes it pos-
sible to communicate with an external network via a "leased line".

Periodic DSL connection set-up
The MoRoS GPRS 2.1 PRO can establish and terminate a DSL (PPPoE)
connection time-controlled. Fixed times can be specified for the con-
nection set-up and termination.

Dynamic DSL connection set-up
The MoRoS GPRS 2.1 PRO can independently establish a DSL (PPPoE)
connection time, if required. The connection will be terminated again
after a configurable idle time or after a configurable maximum connec-
tion time.
28