INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 99 / 144

MoRoS GPRS 2.1 PRO Functions
Configuration via the web interface
In order to enable SMS receipt, check in the menu "Messages" on the
page "Configuration" the checkbox "Activate reception of SMS".
In order to configure the MoRoS GPRS 2.1 PRO for acknowledgement of
an SMS receipt, check the checkbox "Acknowledge incoming SMS".
Then, EVERY received SMS will be acknowledged with a reply SMS, not
only SMS for executing commands.

Only the receipt of the SMS will be acknowledged, not the action asso-
ciated with it. If the action is to be acknowledged, this must be config-
ured as message.
In order to configure a password for SMS receipt, enter this into the field
"Password". The password may consist of letters (upper ans lower case
without umlauts), numbers, punctuation marks (without comma), paren-
theses, underscore, blank and the characters %, & and * and have a
length of 20 characters.
In order to forward SMS that cannot be evaluated to the sandbox, check
the checkbox "Forward not processable SMS to sandbox". Then, all SMS
that cannot be evaluated by the MoRoS GPRS 2.1 PRO will be forwarded
to the sandbox to process them there.
Save your settings by clicking "OK".
99