INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 108 / 144

Functions MoRoS GPRS 2.1 PRO
12.12.7 Configuring the SNMP Agent
The MoRoS GPRS 2.1 PRO provides an SNMP agent that responds to incoming
SNMP Get requests. All parameters that exist in the ASCII configuration file, can be
read via SNMP Get requests (except user name and password of the web interface
authentication). These parameters are described in the MIB (Management Informa-
tion Base).
Configuration with the web interface
In order to enable the SNMP agent, check in the menu "Server services"
on the page "SNMP agent" the checkbox "Activate SNMP agent".
In order to download the private MIB, click on the link "Download private
MIB".
In order to permit SNMP Get requests only from the local network and
send responds only to the local network, check the checkbox "Exclusively
allow SNMP local".
In order to specify the port, on which the SNMP agent receives UDP mes-
sages, enter the port into the field "Port".
In order to specify a contact information for the SNMP agent, you can en-
ter this into the field "Contact information".
In order to specify a description for the SNMP agent, you can enter this
into the field "description".
In order to use the SNMP agent, you must specify and configure the
SNMP versions to be used. In order to use SNMP v1 or SNMP v2c, check
the checkbox "Use SNMP v1/v2c" and enter the community string into the
field "Community". In order to use SNMP v3, check the checkbox "Use
SNMP v3" and enter the SNMP user name into the field "User name". In
order to use an SNMP v3 authentication, select the authentication method
in the drop-down list "Authentication" and enter the password for the au-
thentication (at least 8 characters) into the respective field. In order to use
an SNMP v3 encryption, select the encryption method in the drop-down
list "Encryption" and enter the password for the encryption (at least
8 characters) into the respective field. An authentication is pre-condition
for an encryption.
Save your settings by clicking "OK".
108