INSYS MoRoS GPRS 2.1 PRO Manual Download Page 36

Page: 36 / 144

Mounting

MoRoS GPRS 2.1 PRO



The device is mounted to the DIN rail.



The power supply is connected and switched off.

Disconnect the ground lead of the power supply from the terminal

plus pole of the power supply from the terminal for the



The MoRoS GPRS 2.1 PRO is disconnected from the power supply.

How to uninstall the MoRoS GPRS 2.1 PRO from a DIN rail in a switch cabi-



The power supply of the switch cabinet is switched off and secured against

"GND".

Disconnect the
power supply.

Uninstalling the device from the DIN rail

net:



You will need a Phillips screwdriver with a 4.5 mm blade.

being switched on accidentally.



All cables at the MoRoS GPRS 2.1 PRO are disconnected.

Insert the Philips screwdriver into the groove in the bottom of the Mo-
RoS GPRS 2.1 PRO as shown in the following figure.

Turn the Philips screwdriver into the direction of the MoRoS GPRS 2.1
PRO as shown in the following figure.

Summary of Contents for MoRoS GPRS 2.1 PRO

















































































































































Search results

Summary of Contents for MoRoS GPRS 2.1 PRO

Reviews:

Related manuals for MoRoS GPRS 2.1 PRO

Brands by name

Popular brands

INSYS MoRoS GPRS 2.1 PRO, Manual

Search results

Summary of Contents for MoRoS GPRS 2.1 PRO

Reviews:

Related manuals for MoRoS GPRS 2.1 PRO

Brands by name

Popular brands