INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 88 / 144

Functions MoRoS GPRS 2.1 PRO
12.9.2 Configuring Switch Ports
You can determine, which switch port is operated with which transmission rate and
if it is operated in half-duplex or full-duplex mode. You can also determine if the auto
negotiation (the recognition of the network cabling) is available at each port. These
settings may be required if end devices have problems with the automatic recogni-
tion of the connection parameters. You can determine how the events at the net-
work and the states of the switch ports are displayed at the switch port status LEDs.
Configuration with the web interface
In order to enable or disable the respective switch port, use in the menu
"Switch" on the page "Port configuration" the checkbox "active" of the re-
spective switch port.
In order to enable or disable auto negotiation, use in the menu "Switch"
on the page "Port configuration" the checkbox "Auto negotiation" of the
respective switch port.
In order to define the transmission rate of a switch port, use the radio but-
tons "10 Mbit/s" and "100 Mbit/s".
To operate a switch port in full-duplex or half-duplex mode, use the radio
buttons "Half-duplex" and "Full-duplex".
Save your settings by clicking "OK".
12.9.3 Configuring the LED Display of the Switch Ports
You can determine how the events at the network and the states of the switch ports
are displayed at the switch port status LEDs. We recommend not to change the ba-
sic settings and to change the displays only temporarily for diagnosis purposes.
Configuration with the web interface
Select for the respective network event or the state of the port the colour
of the LED display of the switch port status LED in the menu "Switch" on
the page "LED configuration" via the radio buttons.
Save your settings by clicking "OK".
88