INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 46 / 144

Functions MoRoS GPRS 2.1 PRO
12.1.2 Setting IP Addresses
It must be possible to access the MoRoS GPRS 2.1 PRO in the LAN under a certain
IP address. You must assign a static IP address for this.
A virtual network address can be assigned to the local network. Devices in the local
network can then be addresses with the virtual address via WAN. The MoRoS GPRS
2.1 PRO replaces the network portion of the virtual IP address with the network por-
tion of the local network and forwards the packet to the destination.
Configuration with the web interface
In order to configure a static IP address, change in the "Basic Settings"
menu to the "IP address (LAN)" page.
Enter the IP address of the MoRoS GPRS 2.1 PRO in the LAN into the en-
try field "IP address" and the Subnet mask into the field "Netmask ad-
dress".

When changing the local IP address, the address range of the DHCP
server will be adjusted to the new network automatically, if the net-
mask has not changed. The DHCP server will be disabled with a
changed netmask and must be configured manually. This is indicated in
a notification.
The MAC address of the MoRoS GPRS 2.1 PRO can be found in the entry
fields for the IP address and the network mask under "MAC address" on
this page.
In order to assign a virtual network address to the local network, check
the checkbox "Activate netmapping" and enter the address into the "Vir-
tual network address" field (e.g. 192.168.2.0). This virtual address is only
visible from the WAN side.

If, for example, the local address is 192.168.1.1/255.255.255.0, an en-
tered virtual address 192.168.2.1 will be changed to 192.168.2.0 and
stored.
Save your settings by clicking "OK".
46