INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 97 / 144

MoRoS GPRS 2.1 PRO Functions
12.11 Messages
12.11.1 Configuring the Message Dispatch
The MoRoS GPRS 2.1 PRO can send an e-mail or SMS to any recipient on different
events or trigger an SNMP trap. A series of pre-define events are available for this,
like signals or pulses at input 1 or set-up of connections or VPN tunnels for example.
Configuration with the web interface
In order to enable to send an e-mail, you must enter the necessary data
for the e-mail account in the menu "Messages" on the pa-
ge"Configuration" in the section "E-mail". Enter the e-mail address into the
field "E-mail address" for this. Enter the first and last name of the person
holding the e-mail account (or any text) into the field "Real name". Enter
the domain name or the IP address of the SMTP server into the field
"SMTP server" as well as the port, at which the SMTP server receives e-
mails, into the field "SMTP port" (usually port 25). Enter the user name for
the e-mail account into the field "User name" as well as the associated
password into the field "Password".
In order to enable the SMS dispatch, you have to enter the number of the
SMS Service Center of your mobile phone provider in the menu "Mes-
sages" on the page"Configuration" in the section "SMS" into the field
"SCN (Service Center Number) SIM card 1". If you use a second SIM card,
enter the SCN for this SIM card into the entry field "SCN (Service Center
Number) SIM card 2".
In order to enable to trigger an SNMP trap, you must specify the SNMP
version in the menu "Messages" on the page"Configuration" in the section
"SNMP traps". In order to use SNMP v2c, select the radio button
"SNMP v2c". Moreover, the community string must be entered into the
field "Community". In order to use SNMP v3, select the radio button
"SNMP v3". Moreover, the community string must be entered into the
field "Community". In order to use an optional SNMP v3 authentication,
select the authentication method in the drop-down list "Authentication"
and enter the password for the authentication (at least 8 characters) into
the respective field. In order to use an optional SNMP v3 encryption, se-
lect the encryption method in the drop-down list "Encryption" and enter
the password for the encryption (at least 8 characters) into the respective
field. An authentication is pre-condition for an encryption.
Save your settings by clicking "OK".
97