INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 52 / 144

Functions MoRoS GPRS 2.1 PRO
12.3.2 Automatic Callback (Callback)
You can trigger an automatic callback to a predefined destination phone number of
the MoRoS GPRS 2.1 PRO with a data call or a phone call. You can configure au-
thorized callers for these numbers. The callers can identify themselves via the PPP
authentication methods PAP or CHAP, or via their CLIP phone number. The connec-
tion, which will then be established by the MoRoS GPRS 2.1 PRO, must be config-
ured before in the menu "Dial-Out". Only connections to the preconfigured dial-out
destination are possible.
Configuration with the web interface
In order to trigger a dial-out connection by a caller, check in the menu
"Dial-In" on the page "Dial-In" the checkbox "Activate callback". The dial-
out connection, which is triggered by a caller, must first be configured in
the menu "Dial-Out".
To enable callers to trigger a connection, they must either identify them-
selves via PPP authentication or their phone numbers. Select either the
radio button for "After successful PPP authentication" or "After a call from
these caller IDs". If you select the latter option, enter up to 5 phone num-
bers into the fields on the right, which can trigger a callback by calling.
Save your settings by clicking "OK".
12.3.3 Routing
You can define routes for forwarding data packets in the MoRoS GPRS 2.1 PRO.
Moreover, you can enable NAT for incoming and outgoing packets separately.
Configuration with the web interface
In order to set a default route, check in the menu "Dial-In" on the page
"Routing" the checkbox "Set default route".
In order to enable NAT for incoming packets, check in the menu "Dial-In"
on the page "Routing" the checkbox "Activate NAT for incoming packets".
In order to enable NAT for outgoing packets, check in the menu "Dial-In"
on the page "Routing" the checkbox "Activate NAT for outgoing packets".
In order to add a new route, enter in the menu "Dial-In" on the page
"Routing" the "Net address" and the "Netmask " into the respective fields.
In order to delete an existing route, check in the menu "Dial-In" on the
page "Routing" under "Existing routs" the checkbox of the route(s) to be
deleted.
Save your settings by clicking "OK".
52