INSYS MoRoS GPRS 2.1 PRO, Manual

Page: 62 / 144

Functions MoRoS GPRS 2.1 PRO
12.5.3 Configuring DSL
The MoRoS GPRS 2.1 PRO can connect to a WAN using a DSL modem. Connect the
DSL modem via the LAN ext interface to the MoRoS GPRS 2.1 PRO. The MoRoS
GPRS 2.1 PRO can communicate with the DSL modem via a PPPoE connection. You
must configure the LAN ext interface for PPPoE operation for this. To enable the
MoRoS GPRS 2.1 PRO for establishing a connection to the provider via the DSL mo-
dem, you must configure the DSL connection with access data and activate the op-
tion "Set default route".
Configuration with the web interface
In order to configure the DSL access of the MoRoS GPRS 2.1 PRO, con-
nect the DSL modem to the LAN ext interface.
Then, enter in the "LAN (ext)" menu on the "DSL" page into the entry
fields "User name" and "Password" your user name and your password
for the DSL access.
Enter an optional idle time into the entry field "Idle time" in seconds, after
which the connection is terminated, if no data is transferred anymore. If
you enter "0", the connection remains established for an unlimited time.
Enter an optional maximum connect time into the entry field "Maximum
connect-time" in seconds, after which the MoRoS GPRS 2.1 PRO termi-
nates the connection. Enter "0" to disable the time-controlled connection
termination.
In order to adjust the MTU (maximum permissible number of bytes in a
packet to be received), change the entry in the entry field "MTU (Maxi-
mum Transmission Unit)".
In order to adjust the MRU (maximum permissible number of bytes in a
packet to be sent), change the entry in the entry field "MRU (Maximum
Receive Unit)".

The default settings of MTU and MRU are suitable for most applications
and do not need to be modified usually.
In order to configure the MoRoS GPRS 2.1 PRO for retrieving the IP ad-
dresses of the name servers from the DSL provider, check the checkbox
"Request DNS server address".
Save your settings by clicking "OK".
In order to configure a default route, check in the menu "LAN (ext)" on the
page "Routing" the checkbox "Set default route". The MoRoS GPRS 2.1
PRO cannot switch the data traffic between the internal network at the
switch and the DSL connection without the default route to the DSL mo-
dem.
Save your settings by clicking "OK".
62